CHTS73

Just received 3 more 100AH 48V batteries to bring bank up to 700AH. Hopefully keep the back up generator from running as sun is...

Add a 120V to 240V transformer or auto-transformer and you should be good to go.

So it would be suggested to do the "Standard Update" based on current and available firmware ? Thanks!

Do I have to be in front of the unit to do these updates? At this time, I have no critical loads on the inverter so a restart is not...

On PV Grounding, only tie the panel metal frame or bonded mounting frame (IronRidge) to ground. Bring the PV- and PV+ only to the...

I am still unclear about updates on my 6000XP. Here is what I see: FW Code ccaa-140A0A Suggestion Standard update 0A -> 0C...

When the inverter only runs, the top two fans are active and the lowest fan appears to want to run, and if you flick blades with a small...

A week ago, I connected my 6x385W series wired array to PV2. Thinking of future, I also included separae PV1+ but PV1- was derived...

Also found out that the inverter 6kW PV inputs, (-) side can not be ground referenced as is the case with MidNite Classic 200. A mixed...

On Saturday, I connected my first string of PV panels (6x385W ME)to PV2 input. My other string (12x200W Sharp) is still charging...

Update: Today I connected 6 each 385W ME panels in series to PV2 port. PV voc was around 275V as expected. Aftrer that, I...

I notice that only two of the 3 cabinet fans run when I have a load. Does anyone have info on the 3 wires used on these fans? The...