Hello all i am using 8 kw deye… i linked my own diesel generator to the generator port but when i turn my generator on i see on screen one second generator gives to load and to battery and one or 2 seconds just the load no more battery and again gives to battery and load than only load why? I ll...
My generator is one of the best British one lister but i guess apr need to be modified im not with big knowledge of generator where should i change the frequency in my inverter their s only in grid settings not in generator i have deye inverter
Yeah that s what i am doing but the point here is i shouldn't reach 500 v i should stay under it for safety right? i can go 9 x 49.6 v Voc par panel 446 volt still under 500 volt the input voltage but i have the MPPT input should be under 425 so i have to go back to 8 x 49.6 =396 V
As long you such well known in batteries and electric things can we have small communication in private need to know few hint from a EE with experience
My inverter is 8kw and my solar pannels are 6500watts but the issue i dont want the grid to charge my batt bcz will be so expensive …. I just didn’t get the grid peak shaving thing i ll search on youtube
Mon anglais est parfait monsieur , c toi qui sais pas l anglais mdr…j aissayera en francais … ca fait longtemps j ai pas ecris en francais…je pose la question si quelq1 a 4 battery lithium 4x 100ah en parallel c a dire 400 ah de 48 v combien doit etres le maximum de charge et discharge pour les...
On the catalogue it mentioned if 400 ah u can go 0-120 A as charge or discharge but im asking as long your more
i have 4 in parallel total 400 ah u think i can put 100 charge and discharge ?
So what you mean that If i checked my battery screen their s no place for 2times or 3 times … empty the battery or any scale to find out how many time we fill and empty it
My grid of edl is 15 amps 3300 kw and from 2nd grid private generator is 10 amps 2200 kw my solar is 6500w but u know i only use my grid in rainy and cloudy weather to help battery not be discharge to zero i have 4 lithium 100 amps each total 400 amps my consumption at home max max was 1500 kw...
I know it is so much spoken about… but , i want to know something if u want over paneling to reach Maximum of ur pv input mopt limit wont let you could we make 1 serie of mppt and the second mppt parallel so u can have max voltage max amps? Or h can in each mppt has same time series and parallel...
Is that true if 4 batteries of 100 ah linked as parallel will b 400 ah bcz parallel will increase amps not voltage but when i discharge or charge it s still 100 ah each or i can calxulate as 400 ah in discharge or charge bcz 400 as capacity differ from 100
They are both linked on same but one is off other automatic start when other off the other start but they have diff braker on the system i can turn off the one i want
I check the manual there s nothing about pins anw i linked into can but by hard searching i found protocol of can 00 and for ra485 is 12 right? What is that any explanation and i am asking what s the diff between rs485 and can
Hello,
Living in lebanon is not easy these days, we have 2 types of grid “ 1st government EDL mostly not available because of the crises and 2nd private generators with a high rate for kw like +0.40 cent … so im trying to put settings in my deye inverter when the grid is available i don t want...