diy solar

diy solar

Most reacted threads

  • Fairings for “up and over” installs?

    For those of you that have done large “up and over” installs - have you used a fairing at the front? Any suggestions or issues? I still need to trim down the strut and make connections, but my mount is pretty much finished up.
  • RV Mount Tilt Solutions for Residential panels?

    So its winter and my flat panels just arent cutting it. I have everything mounted to unistrut that run the length of the camper with panel clamps. All of the prefab "tilt kits" I see are for small panels and not panels that are 89" wide. Do any of you have tilt setups for residential panels? How...
  • Installing 2 new 300AH Chins clones - Dropped a wrench and ZAP. Any chance to recover?

    I got a quick shower of sparks and now I'm not seeing any voltage from either battery. Is there any chance that there is a resettable breaker inside these things? Luckily nothing else was connected yet - I was just tying the 2 batteries together. I know the battery cases are like sealed - Is...
  • Multiplus 12/3000/120-50 - 2nd output always on?

    The Multiplus 12/3000/120-50 has a secondary ac output that is only on when on shore power. Does anyone know if it can be configured to be always on just like the primary output? I understand the value of having it only on when on shore, but for my application it would simplify my wiring if it...
  • Budget 300ah LiFePO4 with a confirmed functioning Low Temp Cutoff?

    Do any actually exist? If not, what about 200ah? Its frustrating that they almost always list it as a feature but then in teardowns they don't function. Some of the cheapies (like AmpereTime) seem like they will work fine for my use, but if a cold snap destroys them, thats no good. We live in...
  • Xantrex Freedom 458 direct replacement - Newbie Questions

    Hello - I recently purchased a 2011 Born Free Class C RV with a Xantrex Freedom 458 2000watt inverter/charger. The RV is a 30amp input and the battery system is 12v, currently with 2 cheapie 100AH lead acid batts. I also have a 3600 watt generac generator. I'm having issues with the 458 charging...
  • Charging off generator in RV

    So I have been slowly building out a system in a used 10 year old RV that had a factory 2000watt charger/inverter and on onboard generator. I used a MultiPlus 12/3000/120-50 as a drop in replacement for the original charger/inverter. Once I added some panels and batteries, I realized that...
  • 400watt-ish, ~40"x80" form factor - Any decent resellers that will ship 4?

    I currently have 3 200watt panels on my RV and I would like to add ~1600watts more. I can fit 4 more panels with a max size of 42"x82" a pop. I live in Rhode Island. Any recommendations for decent resellers? I had been looking at the JAM72S10-410/MR from Solaris-shop.com but I have seen a lot...
  • Parallel Connectors or a Combiner Box?

    So I just picked up 4 SolarEver 455 watt panels from Santan for my RV. I'm planning to run them to a Victron SmartSolar 150/100 MPPT. This will be in addition to the 3 200watt panels I have connected to a Victron 100/50. Batteries are (2) Powerqueen 300AH chin's clones in a 12V system with a...
  • Moving on up to full time boondocking in a big honkin 50Amp Class-A - Any first hand experience??

    Howdy All - Last year I built out a pretty capable setup in our Class C, pretty much exclusively through what I learned in these forums: 2420Watts of panels Multiplus 12|3000|120 Smart Solar 150|100 & Smart Solar 100|50, Orion 12|12-30 DC/DC (2) 12v 300AH Power Queen Cooper & Hunter 9kBTU...
Back
Top