I am adjusting all settings in my all in one unit by MPP Solar and found that the Low voltage cut off maximum is higher then what is suggested for an AGM battery , manual shows low voltage cut off range between 21-24 yet for an AGM battery it should be set to no low lower then 24.4. All advise...
I am most likely going to connect the dc out to the grid power cord on the trailer, and may also have to use a dc to dc converter to connect to the trailer 12volt system direct from the battery bank for some things to work such as the water pump and fridge power. I do have many batteries too so...
This is information on the trailer this question relates to. Mentions it has a 12volt to 120 volt 45 amp converter. Based on this I assume that a 24volt to 12volt 40amp dc to dc converter will work.
https://www.jayco.com/files/downloads/prod_brochure_filename_14.pdf
I recently acquired the PIP 2424LV MSD all in one unit and intend to be using it with a trailer, my question is how do I connect it to the trailer electric system. I usually connect the trailer to the battery using those wires that come out from the trailer, however this is a 24volt system and...
Thought you should know that today I reconnected panels 3 sets of pairs then connected as parallel and angled a bit not an exact angle for best solar collection and readout showed 301watts maximum under load with a hair dryer rated above 1800 watt power consumption. This is a little over fifty...
Thank you greatly for that advise I do realize the angle is not exact and that yes the efficiency is effected by shading. The panels are just propped up with what I could find. I am planing to make a custom diy solar mounting rig to better position the panels for optimal power...
Today is a perfect day too without a cloud in the sky and it is currently 152pm. Wonder if I need to send this Unit back, seems defective or something. Won’t turn off when I flip the switch either
Yes these are Renogy Panels, Laid flat and currently in full sun connected as series of three then parallel, six 100 watt panels in total.a hair dryer for a load and maximum wattage input 287watt
Th
makes sense, I am tomorrow going to power something so their is a load and report back what I get. Thank you iamrich.
I have added a load to the system, a hair dryer and saw that the wattage went up to between 225-275. Still under what I expected with 600 watts connected. I am going to now...
As for the freezing temperatures and the lithium batteries, on Wills website he provides links to many different battery manufacturers and one makes batteries that are lithium advanced that are designed for colder temperatures. Another option knowing that you have a generator is to use a heated...