diy solar

diy solar

Sungold SG10KHB-48 inverter, anybody using one?

mciholas

Solar Enthusiast
Joined
Feb 18, 2024
Messages
513
Location
Indiana
Anybody using the Sungold SG10KHB-48 hybrid inverter?


1711834784846.png

15 KW PV, 4 MPPT, 10 KW AC, 48 volt battery input.

Looks decent on specs and at $2400, might be worth considering since that is less than half the cost of the EG4 18KPV.

Is this a relabeled unit from somebody else? Who?

One spec not given is the transfer time from grid fail to backup power restored, also called transfer time. The 18KPV has video showing it does this well, but I see nothing for the SG10KHB-48 so far.

Anybody using one yet? Any reports on performance, quality, etc?

Mike C.
 
Does anyone know more about it at this point? I'm looking at this also for grid tie use in Arizona.
 
No 9540 battery with this so confirm use case

If you get a single Simpliphi 6.6 DC ESS for $3500 you are about $1500 ahead vs the minimum 18kpv config.
 
So no one knows anything about it or has tried one?

Definitely planning on adding batteries.

We've already taken a serious loss on this solar install. I'm just trying to get what ever I can out of it.
I have to keep the inverter cost around $2000 to stay in my budget.
Practically everything is made in China anyhow.
 
Does the SPH 100 48p : 1. Require two solar inputs or will one work if it fits the specs per controller and 2. What is the amperage of each leg?
Thanks, not sure if this is the place to ask this question
 
Does the SPH 100 48p : 1. Require two solar inputs or will one work if it fits the specs per controller and 2. What is the amperage of each leg?
Thanks, not sure if this is the place to ask this question
If it's the same as the model above 1 will work and 22A/MPPT
 

diy solar

diy solar
Back
Top