What other threads??I spent some time with HA today, following other threads on the topic and have mapped individual cell voltages for my B300's into HA. love it.
What other threads??I spent some time with HA today, following other threads on the topic and have mapped individual cell voltages for my B300's into HA. love it.
That was vague, not this site. one of the HomeAssistant forums. I'm happy to share what you need to duplicate.What other threads??
2024-04-02 06:34:22 startup archives unpack
2024-04-02 06:34:24 upgrade python3-anyio:all 4.2.0-1 4.3.0-1
2024-04-02 06:34:24 status half-configured python3-anyio:all 4.2.0-1
2024-04-02 06:34:24 status unpacked python3-anyio:all 4.2.0-1
2024-04-02 06:34:24 status half-installed python3-anyio:all 4.2.0-1
2024-04-02 06:34:25 status unpacked python3-anyio:all 4.3.0-1
2024-04-02 06:34:25 startup packages configure
2024-04-02 06:34:25 configure python3-anyio:all 4.3.0-1 <none>
2024-04-02 06:34:25 status unpacked python3-anyio:all 4.3.0-1
2024-04-02 06:34:25 status half-configured python3-anyio:all 4.3.0-1
2024-04-02 06:34:27 status installed python3-anyio:all 4.3.0-1
root@bananapi:~# 2024-04-02 07:38:38 ERROR Crashing with uncaught exception:
Traceback (most recent call last):
File "/usr/local/lib/python3.11/dist-packages/bluetti_mqtt/server_cli.py", line 98, in run
devices = await check_addresses(addresses)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.11/dist-packages/bluetti_mqtt/bluetooth/__init__.py", line 28, in check_addresses
devices = await BleakScanner.discover()
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.11/dist-packages/bleak/__init__.py", line 216, in discover
async with cls(**kwargs) as scanner:
File "/usr/local/lib/python3.11/dist-packages/bleak/__init__.py", line 126, in __aenter__
await self._backend.start()
File "/usr/local/lib/python3.11/dist-packages/bleak/backends/bluezdbus/scanner.py", line 179, in start
adapter_path = manager.get_default_adapter()
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.11/dist-packages/bleak/backends/bluezdbus/manager.py", line 299, in get_default_adapter
raise BleakError("No Bluetooth adapters found.")
bleak.exc.BleakError: No Bluetooth adapters found.
2024-04-02 07:38:38 INFO Shutting down...
apt install python3-anyio=4.2.0-1
Hi,
bluetti-mqtt is not longer working for me, found out that an update this morning may be the case. /var/log/dpkg.log says:
....
Who can help me out of this?
Thanks
Edit: python3-anyio set to HOLD.
"About" says:I am not seeing this on mine. What edition of HA are you on? I'm running 'HA core' on a Pi.
Sapresti dare qualche info in più in merito ai dati ?Oggi ho trascorso un po' di tempo con HA, seguendo altri thread sull'argomento e ho mappato le tensioni delle singole celle per i miei B300 in HA. lo adoro.
Yowza - your B1 and B2 SOC %'s are way different (as are mine)! Yesterday I had one at 100%, and the other at... 38%. I ran my AC for an hour to drain the batteries a hair, and within a few minutes of shutting off the AC it shot up to 100%.
Yowza - your B1 and B2 SOC %'s are way different (as are mine)! Yesterday I had one at 100%, and the other at... 38%. I ran my AC for an hour to drain the batteries a hair, and within a few minutes of shutting off the AC it shot up to 100%.
It's a bummer. Interesting that it appears that yours are different opposite of mine. B2 goes into B1 goes into AC300. I was about to conduct an experiment to see if the order might change things... saved me the effort.Yes, but they are the same voltage. It is the dang BMS that is confused. I actually did a full calibration cycle last week to see that would improve the estimation, not really as you can see.
Mine are attached the same.It's a bummer. Interesting that it appears that yours are different opposite of mine. B2 goes into B1 goes into AC300. I was about to conduct an experiment to see if the order might change things... saved me the effort.
I don't show bluetti-mqtt or hassio-bluetti-bt works at all with the latest firmware from Bluetti. They did something to block it or changed the way the BLE responds. The only way I've found to get it to work again is to have the latest firmware removed from the Bluetti device.If you're looking for an alternative, the hassio-bluetti-bt HACS add-on has been workingflawlesslynearly flawlessly for me for the last month. You should get on the pre-releases (0.0.22 is the latest).
Hmm... no suggestions on that. I got my system to work reasonably well*, and haven't touched the firmware since!I don't show bluetti-mqtt or hassio-bluetti-bt works at all with the latest firmware from Bluetti. They did something to block it or changed the way the BLE responds. The only way I've found it get it to work again is to have the latest firmware removed from the Bluetti device.
Same. I haven't updated my firmware either, nor is it connected to Wifi. However, eventually most of us will need to warranty out our machines and the new/replacement will come with the new firmware, thus leaving us screwed.Hmm... no suggestions on that. I got my system to work reasonably well*, and haven't touched the firmware since!
* The BMS's can get wildly out of sync, which is a bummer.
@plympton I saw that you are a contributor for "hassio-bluetti-bt". Have you guys discovered more data? I have the original emails from
[/QUOTE]
I just contributed some $ to the cause, not the code. Might pick it up if I unexpected have some free time in a few weeks.