Hello guys,
I am just trying to get my 4S system( 4 x 230AH Batteries + Daly 4S 200A smart bms) to work , during cell configuration and test I did realized that
Daly BMS does not cut off the charging after max cell protection voltage (set to 3.65V) is reached. Unit continues to charge the pack and cell voltage continuosly rise up to 3.7V and above . The error was raised , but charging MOS was not switched off . Any ideas what is wrong here? WIll BMS wait for the sum volt high protect ?
I am just trying to get my 4S system( 4 x 230AH Batteries + Daly 4S 200A smart bms) to work , during cell configuration and test I did realized that
Daly BMS does not cut off the charging after max cell protection voltage (set to 3.65V) is reached. Unit continues to charge the pack and cell voltage continuosly rise up to 3.7V and above . The error was raised , but charging MOS was not switched off . Any ideas what is wrong here? WIll BMS wait for the sum volt high protect ?