As I anxiously wait for my (32) EVE 280Ah cells from Amy, I am gathering equipment for the build-out. I'll have (2) 16S banks and I've purchased a Blue Sea Systems m-6007 Mini Selector Battery Switch (specs here: m-Series Mini Selector Battery Switch) to isolate the banks if needed and use as a disconnect. I'll have a 250A class T fuse protecting each bank but I just noticed that the Blue Sea Switch is only rated for 32V DC max. It's current rating has an intermittent rating of 500A for 5 min and 300A continuous.
I'm good on the current side as I'm not expecting to draw more than 200A max at any given time, but does the 32V rating have any wiggle room? Or is at absolute no go because of the 32V max rating? I'm thinking it's a no go, so what is everyone using for a selector switch at these higher voltages?
I'm good on the current side as I'm not expecting to draw more than 200A max at any given time, but does the 32V rating have any wiggle room? Or is at absolute no go because of the 32V max rating? I'm thinking it's a no go, so what is everyone using for a selector switch at these higher voltages?
Last edited: