mthom16
New Member
I am using 2 Victron Lynx Distributors. In between them, I want to add the Victron Smart Shunt 500 and the Battery cutoff switch. One Distributor will be for my battery banks consisting of 2 sets of 12v 200ah batteries in series to get me a 24v setup. Each bank will be wired to the distributor and fused with a MEGA fuse at 300amps. from there it will go through the Shunt and battery cutoff switch to another Distributor and then to the Victron Mulitplus. My question is, can I use a Blue Sea Paralleling link bus from the stud side of the distributor to the items mentioned? Or do I have to make a very short 4/0 cable for each?
