I just purchase a PIP - 1012LV-MS and was expecting to get around 20 amps of charging power while connected to shore power. The 280 a/h lithium battery is only charged 35%. The charger starts charging at about 17-18 amps (which is fine), but then cuts down to around 8 amps after and hour and a half ( the battery is still only 45% charged. Any ideas? Is it going into a premature float? Settings are as follows:
1. UEI
2. 60A
3. APL
4. SDS
5. USE
6. LFD
7. LFD
8. 120
9. 60
11. 20
12. 14.5
13. 14.4
16. SNU
18. 6ON
19. ESP
20. LON
22. AON
23 BYD
25. FDS
26. 14.6
27. 14.6
29. 10.5
31. N/A
33. EDS
34. 14.6
35. 60
36. 120
37. 30D
1. UEI
2. 60A
3. APL
4. SDS
5. USE
6. LFD
7. LFD
8. 120
9. 60
11. 20
12. 14.5
13. 14.4
16. SNU
18. 6ON
19. ESP
20. LON
22. AON
23 BYD
25. FDS
26. 14.6
27. 14.6
29. 10.5
31. N/A
33. EDS
34. 14.6
35. 60
36. 120
37. 30D