Mannfamilywoodworks
Solar Enthusiast
I’ve been battling this for a week now.
Battery arrives needing a wake up signal from PCS.
Okay. I hook everything up properly.
Nothing.
I’m checking my 240v ac input. Looks great.
I’m checking dc voltage at battery terminals on inverter. 1.4-1.6vdc.
Weird right?
I get to thinking how my mother would wake me up as a child. She shook me gently and I was awake.
Long story short.
It took giving the battery a very small shake to get it to “wake up”…no good. I do not like that at all.
I just want to use this battery and see what it can do.
It won’t let me communicate.
I didn’t get a manual with this thing which is stressful because I like to have a paper copy manual in front of my eyes.
So far it’s awesome at giving me stress.
I have one battery. (5kwh)
I have one 240v ac input.
Growatt axe 5.0l-c1 battery is hooked up to growatt 6kw split phase inverter.
When inverter is in default mode on initial start up I can charge my battery because there’s no bms communication.
Default mode is set for an agm battery.
Go to setting 05
Select LI 05
Then I was told to select protocol option L01-51
Nothing.
Same fault code 20.
Inverter eventually turns off after a minute or two.
my connections are solid.
Something is missing here.
Battery arrives needing a wake up signal from PCS.
Okay. I hook everything up properly.
Nothing.
I’m checking my 240v ac input. Looks great.
I’m checking dc voltage at battery terminals on inverter. 1.4-1.6vdc.
Weird right?
I get to thinking how my mother would wake me up as a child. She shook me gently and I was awake.
Long story short.
It took giving the battery a very small shake to get it to “wake up”…no good. I do not like that at all.
I just want to use this battery and see what it can do.
It won’t let me communicate.
I didn’t get a manual with this thing which is stressful because I like to have a paper copy manual in front of my eyes.
So far it’s awesome at giving me stress.
I have one battery. (5kwh)
I have one 240v ac input.
Growatt axe 5.0l-c1 battery is hooked up to growatt 6kw split phase inverter.
When inverter is in default mode on initial start up I can charge my battery because there’s no bms communication.
Default mode is set for an agm battery.
Go to setting 05
Select LI 05
Then I was told to select protocol option L01-51
Nothing.
Same fault code 20.
Inverter eventually turns off after a minute or two.
my connections are solid.
Something is missing here.