James@N-Utah
New Member
- Joined
- Oct 4, 2022
- Messages
- 5
I have 2x SOK 12v206 in series for 24v, BMS rated max discharge 100 Amp, hybrid MPPPT lv2424 is 2400 watts output. When I run 120v tools (panels disconnected but full charge on SOK's) 9 amps (1080w) & below I can get many hours run time. When I go above 10 amps, the batteries BMS opens circuit on one of the pair (random) & kills the controller as 24v went away. So I can only use appx 1/2 of the controllers rated 2400 Watt output.
Can the BMS be upgraded to 150 amp discharge protected BMS ?? Pro/Cons ?, Any recommended part numbers or types ?, & more importantly, procedure / method to change it out.
ps; thanks Will for all your work over the years & especially the forum so we can all benefit from accumulated knowledge base from all the folks out there !!
Can the BMS be upgraded to 150 amp discharge protected BMS ?? Pro/Cons ?, Any recommended part numbers or types ?, & more importantly, procedure / method to change it out.
ps; thanks Will for all your work over the years & especially the forum so we can all benefit from accumulated knowledge base from all the folks out there !!