Good evening,
I bought a BMS Jiabaida SP22S001 20S 250A
with these connectors you can see in the picture.
My aim is to make a 24V liFePo4 battery,
but the wiring diagram is nowhere to be found.
My only support relies on an image found in this forum, which would be great for me but,
as you can see in the secondo photo, in my connectors there aren't cables number 19 and 20.
I wrote directly to Jiabaida and got no response.
If I refer to the image with the wiring diagram for 8 cells,
the cables from number 7 to numer 19 are all connected to cell number 6,
while cable number 20 goes to cell 7
and cables 21 and 22 are attached to cell number 8.
In my plug, cables number 19 and 20 are missing as i pointed out before.
According to logical reasoning,
I would think that in cell 8, I connect the numbers 21 and 22
and in cell 7 (not having cables 20 and 19), I put the number 18. Am I wrong?
Please, can you help me?
I bought a BMS Jiabaida SP22S001 20S 250A
with these connectors you can see in the picture.
My aim is to make a 24V liFePo4 battery,
but the wiring diagram is nowhere to be found.
My only support relies on an image found in this forum, which would be great for me but,
as you can see in the secondo photo, in my connectors there aren't cables number 19 and 20.
I wrote directly to Jiabaida and got no response.
If I refer to the image with the wiring diagram for 8 cells,
the cables from number 7 to numer 19 are all connected to cell number 6,
while cable number 20 goes to cell 7
and cables 21 and 22 are attached to cell number 8.
In my plug, cables number 19 and 20 are missing as i pointed out before.
According to logical reasoning,
I would think that in cell 8, I connect the numbers 21 and 22
and in cell 7 (not having cables 20 and 19), I put the number 18. Am I wrong?
Please, can you help me?