Daly Bms smart switches itself off after a while without significant load

Hello,
a couple of month ago I upgraded my batteries from from 235Ah to 465Ah. I also upgraded to a 300 Amp Daly Smart Bms from a 200 Amp dumb Daly bms. Now It is the time of the year where I can't get enough solar to charge the battery so it lasts during the night. I have a 3.5kw PowMr hybrid inverter and it switches to grid mode in the evening. Which is fine to me.
But...
A while after the Inverter switches to grid and there is only 50Watts drawn from the battery, the bms cuts power to battery. Which is very anoying, because I have to push the button on the Bluetooth module every morning to active the bms again.


As you can see in the picture of my Ina226 shunt. the Battery is switched off.

Has anyone an Idea how I can prevent that? I don't even know what function of the BMS could cause this behavior.

Thanks

Got it, it is the sleep time set in the app, or pc program.

I'm having the same issue. What did you do to correct behavior? I see you referred to sleep time, what did you set it to and is your problem resolved?

inetblue said:

I'm having the same issue. What did you do to correct behavior? I see you referred to sleep time, what did you set it to and is your problem resolved?

Click to expand...

Depending on your model, try 65535 or 15300 sleep codes in your BMS smart software.

My Daly is bad. I've switched to REC BMS. I don't think Daly is a valid product