Deye inverter not showing Consumption when no solar Production

Librelec · Feb 11, 2023

As you can see from the 2 above screenshots, the Deye inverters (12kW 3phase and 5kW 1 phase on different sites) don't show the houses Consumption figures until the solar production begins for the day.

What setting changes that?

I've already gone through Deye and they weren't helpful with this problem.

GregTR · Feb 11, 2023

No setting to change that. When there is no solar production the inverter switches to bypass mode to conserve energy and it essentially shuts down. The plus side is that it's not consuming 90W or so power, the downside is that you get no measurements on the load side.

Solution is to add battery to the system in which case the inverter stays on to utilize the battery. Otherwise you will need an alternative method of measuring consumption such as the Emporia Vue.

Librelec · Feb 12, 2023

GregTR said:
No setting to change that. When there is no solar production the inverter switches to bypass mode to conserve energy and it essentially shuts down. The plus side is that it's not consuming 90W or so power, the downside is that you get no measurements on the load side.

Solution is to add battery to the system in which case the inverter stays on to utilize the battery. Otherwise you will need an alternative method of measuring consumption such as the Emporia Vue.

Thanks, both sites are getting batteries, so that solves that.

vostraga · Feb 14, 2023

Connect the meter to Deye. Over-meter deye can get Consumption.

Deye inverter not showing Consumption when no solar Production

Librelec

New Member

GregTR

Solar Enthusiast

Librelec

New Member

vostraga

New Member

Similar threads