Works fine in Norway..Hi, can you log in to the epever cloud app? keeps getting an error message.
Works fine in Norway..Hi, can you log in to the epever cloud app? keeps getting an error message.
Hi, i also have an epever up3000 hi - hm10022.. Im guessing you still are unable to get data for total usage etc using 4g or wifi? Epever support told me a while back they should be releasing a wifi box for the hi series (as the current one doesnt work) back in november, then it was january, now i think march! Wont be holding my breath.. They seem good with hardware, but lacking in software,, i think they need to start using some ai like chat gpt for their programming lol.Works fine in Norway..
Cool, maybe thats the way to go..Hi, i also have an epever up3000 hi - hm10022.. Im guessing you still are unable to get data for total usage etc using 4g or wifi? Epever support told me a while back they should be releasing a wifi box for the hi series (as the current one doesnt work) back in november, then it was january, now i think march! Wont be holding my breath.. They seem good with hardware, but lacking in software,, i think they need to start using some ai like chat gpt for their programming lol.
Im looking into an alternative way of viewing data from the inverter like this: but its not simple it seems
EPEVER UPower-Hi modbus setting, if you need :)
If someone needs, here is config for UPower-Hi hybrid inverter device (I have model UP3000-HM5042). You get following values from inverter. Also you can control UPower-Hi when to charge battery from grid. modbus: - name: epever type: tcp host: 172.16.0.33 port: 502...community.home-assistant.io
ahoj, vyriešil si problém so SSID?Prosím, dajte mi radu. musíte prevádzkovať EPsolar WiFi-2.4G-RJ45-A
Ssid HN-00001 stále zobrazuje správne SSID HN-63508. Urobil som aj reset. Mám už druhý produkt a stále ukazuje na SSID HN-00001
Hi, i have the same inverter, unfortunately the station monitor software does not work with any upower Hi series inverter.. The usb to serial cable that they supply is only for updating the firmware on the inverter.. There is a way to get info from the inverter to the android app 'epever pair' though, you just have to make a lead up yourself and buy a ebox-wifi-01.Hello guys I can't connect to inverter monitor(up)1.2v my system. I have the epever upower hi series UP3000-HM10022 and it gives me only voltage information with the usb cable.
Hello thanks for your reply.Hi, i have the same inverter, unfortunately the station monitor software does not work with any upower Hi series inverter.. The usb to serial cable that they supply is only for updating the firmware on the inverter.. There is a way to get info from the inverter to the android app 'epever pair' though, you just have to make a lead up yourself and buy a ebox-wifi-01.
Or even better, use the ebox-wifi-01 to connect to home assistant to display all the data, see below:
View attachment 137061
View attachment 137062
Yep no probs, ill post up a step by step guide in a little while and link to it here.. It took a while to get it all sorted as im new to HA etc, but with thanks to someone on HA forum that had already figured it, i was able to do it. But its still not obvious and someone needs to make a how to thread, so thatll be me then lol!Hello thanks for your reply.
I already have the ebox-wifi-01 from a tracer mppt charger. Is there any tutorial out there?
I don't even know how to update the firmware.
May I ask you to guide me on this? It Looks great.
Done. Here it is:Thanks man!! I'm waiting for it
That must be the one they have been saying about for months now, shame it looks like cloud only? - so no good if their servers go down in the future?There is a new wifi module in the marked now. I asked the support about it, it is in stock, but it's taken back for an upgrade.. so soon the new version are ready.. its wifi, - redy for cloud. The name i wifi module rf45 D
EPEVER WiFi Adapter 2.4G RJ45 D
Explore the 2.4G RJ45 D WiFi Adapter for seamless wireless connectivity and enhanced networking. Unlock faster, more reliable connections today.www.epever.com
You only need the RPI for home assistant.. You can just get the adapter, wire it up and use the app, that tells you all the inverter settings.so i must to buy Raspberry Pi and the adapter to make this work. hmm.. at least i have ebox wifi 01 and the inverter Epever products are very good for its price but with the software is like we live back to 1992 Thanks for your guide I'll set this up once I end with the wiring of my system.
HA gives you all the information that you need from the system right?
Cable is just for updating the inverter firmware. I wouldnt bother though unless you found a bug or something.yes yes I understand. I will buy the adapter first to make things just work. RPI it's a must have as I understand not only for the epever units but I will dive in this world later once I finish my setup and have a clear mind. I still don't understand why epever hi series comes with the usb cable? Rly I thought that is a broken cable or I receive a broken unit.
I have one running 14.4kw eve cells (2 x 24v banks in parallel). Equalize is for lead acid, and you set the Equalize voltage to the same as the boost voltage, and the equalize time to the same as boost time.. Its all a bit confusing all the settings, i can post a copy of all mine to help you if you want, im at work atm though...I know it's off topic, but is anyone using the up3000 hi - hm10022 with lifepo4 batteries? reading on the manual it seems it's not possible to set the equalising time to 0, neither to set a low voltage for the equalisation as it's not possible to be modified by the user..
How have you dealt with that problem?
(i'm referring to option 10 and 11 on the advance interface for engineers)
thanks for the quick reply.. I have a rough idea of how to set up the parameters (i extracted values from varies topics and articles).I have one running 14.4kw eve cells (2 x 24v banks in parallel). Equalize is for lead acid, and you set the Equalize voltage to the same as the boost voltage, and the equalize time to the same as boost time.. Its all a bit confusing all the settings, i can post a copy of all mine to help you if you want, im at work atm though...
Pretty sure i can set mine, so maybe yours has updated firmware that stops you from changing it, but its locked to the same voltage as the boost voltage anyway according to the new manual.. (but no, dont set to a low voltage if it can be changed, set to same as boost voltage.). I use 'user' type battery in the settings, maybe change to that if your not already.. So then set the equalize time to the same as the boost time.. You cant connect the inverter to your pc, not using the station monitor software anyway (have a read further up in this thread..)..thanks for the quick reply.. I have a rough idea of how to set up the parameters (i extracted values from varies topics and articles).
I can't connect the unit to my pc at the moment.. so i thought i could do it throught the standard menu.
The problem is that looking at the manual the "equalising charging voltag" (option 11 on the engineers interface)
cannot be set by the user. is that correct? ( i was thinking to set a low value as other have suggested for other chargers.
If you have a way to change that voltage, than i should'nt have any problems setting the charger up.
i'll post my setting below
ok so it means that the equalising should happen when the boost voltage has been already reached and no current will actually go through?Pretty sure i can set mine, so maybe yours has updated firmware that stops you from changing it, but its locked to the same voltage as the boost voltage anyway according to the new manual.. (but no, dont set to a low voltage if it can be changed, set to same as boost voltage.). I use 'user' type battery in the settings, maybe change to that if your not already.. So then set the equalize time to the same as the boost time.. You cant connect the inverter to your pc, not using the station monitor software anyway (have a read further up in this thread..)..
Sorry, im telling you wrong, set it to the float voltage, not boost voltage... Been a while since i set mine up. I got the info from this video if i remember correctly:ok so it means that the equalising should happen when the boost voltage has been already reached and no current will actually go through?