Schneider 60 150 charge controller

I'm trying to get my second Schneider 60 150 charge controller to be associated with battery bank 2. However, it's greyed out and can't find where to make the change. Any ideas?

By 'greyed out', do you mean no data is displayed in the CC window? I just added a 3rd Schneider charge controller for a 3rd array, and I got info showing in the data window on the CC by connecting the unit to my battery bank and adding the unit to the Schneider network via their comms cable. I have an older Schneider XW6048, so this info is based on experience with a complete Schneider set up. Even before I had connected the new array I had system info on that screen, as well as the SCP. And you can easily program your 2nd CC from the SCP by using the copy feature to duplicate settings that you have on your CC #1. If you don't have an SCP (system control panel), you'll have to read their manual - I think the info you'll need is in there. Good luck!

Thanks. The second Schneider is working but I can't assign it to any bank other than 1. I'm using Insight home.

I don't think my old XW will even work with Insight Home. Also, there is no provision for assigning a second battery bank - it assumes only one battery bank. Oh well, old technology.....

It looks that way. Thanks.

Do you have a BMS that can communicate with the XW? I can change the battery bank configuration in the battery to bank 2.

I have 2 battery banks. One lithium one AGM. The lithium one has BMS and I was able to list it as battery bank 2. However, in the 60 150 that feeds the lithium batteries I can't assign that to battery bank 2.