Rednecktek
Solar Wizard
Boost charge would be the term. That should be 14.6v. Equalizing doesn't apply as that's only for lead acids. Float should be 14.0v or 14.2v.
Yes, but is that once it has power on it?That sounds like improvement but 13.3 is still not full, that's just the start of the flat part of the curve. You should be seeing 14+v on the battery when it's getting near the top.
Okay, here is a new one that I wasn't paying attention to...checked the battery, flucuating around 14v right now, but the AMPS, in my opinion, is too low, flucuating around 12. Isn't that way too low for 2 x 100ah lifepo4 batteries?That sounds like improvement but 13.3 is still not full, that's just the start of the flat part of the curve. You should be seeing 14+v on the battery when it's getting near the top.
Okay, so the amps, which are currently at 13, should be at 100 on the SCC to be fully charged, right?That sounds about right, that's about all your panels can produce at the moment, 160-ish watts. Don't panic, it's doing its job.