Search results

No. the bms output reads less than 3.5v Is there a way to check its operation? It is a daly without bluetooth, 12v 4s and 250a

no, only up to 13v

Después de descargarse, la batería tiene 13,37 V, cada celda tiene aproximadamente 3,31 V. pero el BMS solo tiene un voltaje de salida de 3'24v. Es un Daly 250A. ¿Alguien sabe qué podría estar causándolo?

Hello everyone. After installing my 12v 4s battery, it was charged to 14.6v, it has been stopped for a while and when I go to use it it reads more than 15v, when connecting it to consumers the voltage rises to 15.80v. Does anyone know what this is and how I can fix it? Thank you.

Hi. I would like to know how long the cells could be stored since I received them without uploading or downloading them. Thank you

the eve de bassen cells have arrived. They have taken two months to arrive in Spain. the bus bars are too narrow. I will make other aluminum ones, the width of the terminal and 2 mm thick, to avoid corrosion. or is copper better for conductivity? The cells look new, they come very well packaged...

the load would be at 10 amps. I would need to know if I have to set it to 3.2v.

I have four 280ah cells in charge, I have not received them yet. I would like to know if this power supply would be worth to do the balance and how do I have to regulate the voltage and amps Thank you...

I would like to mount separate components, not a complete unit, in case one fails I don't have to change the assembly. The idea is to be as self-sufficient as possible and not stop while camping, that's why I need to charge from the alternator and the plate.

I get it. the installation of the van, lights, water pump, usb sockets and heating go to 12v. the induction hob, the hot water boiler and the refrigerator are connected to the inverter at 220v. The inverter is only connected to the bsm output and battery positive. for this installation I do not...

no, the negative connection goes to the auxiliary battery, to a terminal connected to the bms.

then for the installation of my van without grounding I must mount the insulated one. Is that so?

the BMS is a Daly 250a common port, I bought it from aliexpress.

looking at the victron orion 12/12 30 that you recommend, I see that it is isolated and not isolated. can you tell me the difference for my use.

well, I saw that if it has bluetooth function

i talked to renogy but it can't hold my solar panel. I have not seen Orion with bluetooth, if there is it is a good option.

HRTKD is there any special reason to mount the Victron charger and not the Votronic? I find a 30a Votronic quite cheaper.

my van has a 150a alternator

Thanks, but the biggest orion victron I find in 12v is the 30a. the Voltronic 50a could be a better option?

Thanks for the reply Dzl. I live in Spain. Yes, I mean a charger from an alternator, I have looked at the 50a Voltronic, I think it can be used to charge the battery. Investor I have seen this, although I doubt its quality...

How do you see a 50a dc-dc charger for 280ah lifepo4 cell charging? I don't have a fixed budget for the 220v converter

placas, regulador y pilas que ya tengo. Necesito un cargador de un alternador y un inversor / cargador de 220v. No he establecido un presupuesto fijo.

Thanks for the answers. that's what, at the moment, I have bought and I think it can be worth. I would like you to tell me if so. I have to look at an inverter that convinces me of a continuous 2500 / 3000w.

I am buying the components for the electrical installation of my camper. At the moment I have: Lifepo4 280ah 12V Battery BMS 250a Solar panel from 400w to 24v Regulator Victron 100/30 I am thinking of mounting a 50ah Voltronic alternator charger what do you think of this configuration?

Thank you DIYVan

Could you use this device with a solar panel 400w 24v?

Thank you very much for the reply. I imagine I wrote it in my language, I tried to use the translator to understand me. I will not use the induction at maximum power, and the rest of the consumers will be at 12v

¿Podría usar este dispositivo con un panel solar de 400 W y 24 V en un Fiat Ducato 2016?

Today I ordered a 250th bms, for the consumption I have and from what I have been able to read in the forum it was worth it.

Hola. Quiero montar la instalación eléctrica de mi autocaravana. Como el principal consumidor es la placa de inducción de 2000w y quizás un termo de 1500w que no funcionaría al mismo tiempo, además de un refrigerador, LED y una bomba de agua de 12v. Tengo un panel solar de 400w y voy a montar...