Search results

Hi all I wonder if it's possible to setup my Deye 8K to have a minimum 50w being exported continuously ? I just want to avoid, as much as I possibly can, the importing of any power during my higher tariff hours (5am right around to 2am - cheap rate from 2am to 5am) I currently have a constant...

My problem is that the BMS reaches 100% but I cannot get cells much above 3.3x volts. They are 3.4v with some touching 3.5v while charging, but not while resting in standby

So when fully charged, I should set the SOC Ah equal to the Capacity - correct ?

Can someone please post / share a parameters file which allows cells to be charged above 3.4v. When charging, my charging voltage can get over 3.4v but once charging stops, the actual voltage is below. I have cell overvoltage set to 3.65v and Monomer warnings turned off, but when charging, the...

Hi all, After watching Andy's videos on the Seplos and with his Victron setup, I am trying to do the same with my Seplos to Sofar ME3000 - to at least get the pack charging up towards 57v. So this morning, I watched as to pack voltage gradually climbed. The pack was at 98.2% and 55.33v, with...

Hi all Does anyone recognise this logger ? It's connected to my old GTIL2 but I cannot for the life of me get onto it. I was hoping to change the SSID it connects to. I've tried admin / admin, admin / none, none/ admin, admin / password, manager / manager, capital letters on each too. This...

I have 2 x Seplos - Master and Secondary. The best way to extract the data is not with Bluetooth gimicks, but with the USB into a RPi (or similar) and run the script in this https://github.com/byte4geek/SEPLOS_MQTT HOWEVER, Alan has confirmed that you will NEVER be able to extract the data of...

I still haven't tried myself yet

Hi all We have a company installing a SMA Tripower 3-Phase 10kW inverter with 12kWp of panels, over two strings. But as they turned it on, the green light flashed on and off, and the app had the error "sma insulation resistance" The installers appear clueless. Does this sound like an AC...

Here is my cable connected to a standard Cat5 Patch Lead A+ to the White/Brown B- to the Brown Gnd to the Green Gnd to the White/Green It SHOULD work with any RS485 to USB dongles from Amazon

Did you not see my Photos ? For ONE Seplos only - ALL DIP switches are OFF For TWO Seplos - On MASTER Seplos, DIP 1 is ON, all the rest off, On Secondary Seplos, DIP 5 is ON, all the rest is off For a cable between TWO Seplos, just just need standard Cat5 patch cable

If you mean the cover for the BmS, then it's on Printables

@duunoit Link RS485A to RS485A with standard Cat5 patch lead For the DIP Switches Master = 5 ON / All others = OFF Second = 1 ON / All other = OFF In the Photo, Master is at the bottom, Second is at the top. Master has CANBUS to the Sofar ME3000, RS485A to Second RS485A, Second has RS485B to...

I have 2 x 16s strings with 2 x Seplos BMS, working very well. But I have a question about monitoring. I seem to be unable to monitor the cells in Pack 00. I can see Pack 01 but not 00. Has anyone worked out as to how this might be possible ?

Hi all, I am wondering if I can get the data from a Tigo TAP from it's RS485 interface straight into a Raspberry Pi or similar ? It seems to me that the Tigo simply sends the Data into a Tigo Gateway and sends the data out to the cloud, so I guess it's all about knowing the format of the RS485...

Has anyone managed to pull the voltages of the 16 cells over RS485 Modbus into Node-Red ? I just would like to get that into my dashboard

I have just completed my Seplos BMS 16S to a Sofar ME3000 Just some notes The ME3000 Inverter to Battery cable works perfectly. It's an RJ45 to RJ10 (not RJ11). The pinouts are. RJ45. RJ11 4. 1 5. 2 7. 3 8. 4 On the ME3000, select the battery type of General...