Search results

Thank you ScrotusGobbleBottom. I was misunderstanding the on grid EOD setting. I set it to a couple volts (46v) above my low voltage warning (44v) and it immediately started doing what I want. That should be good to switch back to grid before the batteries get too low. Everything looks happy...

Thanks. I'm using a couple of dumb 25.6v lifepo4 batteries in series until I can afford the indoor 14kwh eg4 model in a few months. So there's no battery communication at the moment. I'll fiddle with the setting you mentioned and see if I can get it to do what I want.

Can anyone explain to me how to get my new 6000XP out of bypass mode? I'd like to have it set up so that it runs off-grid all the time, unless the battery is drained, at which time it'd use the grid connection to power the loads. Right now, even though the battery is full, it's just bypassing...

If you can get connected to the wifi dongle via the built-in access point, you should able to make this configuration change. That's actually the preferred/documented way to make it work in the US. In my case though, while I could connect to the access point, I was never able to actually connect...

I think the main advantage of the Shine app is that I can actually see my generation stats. Before getting it to work, I basically just saw my total lifetime amount generated, and once it got over 1MWh, the significant digits went away and I had no real insight. For the mounting on this...

<one year later> I figured out that the Growatt USB dongle was trying to connect to server.growatt.com, which kept failing because it's in China. I went through a whole rigamarole to get it pointed at server-us.growatt.com and it has been working great ever since. More details can be found in...

I just want to share my experience with getting the Growatt wifi to work that came with my MIC 3000TL-X devices bought from Signature Solar. I bought the first one last year, and was never able to figure it out. I just tried again tonight because I just commissioned a second one with some cheap...

I recently acquired a SunPower MI-C-320-US208/240 microinverter for some experimentation. It has big fat, waterproof connectors on it and I am wondering if anyone knows what they are called and where I can find the materials to build a whip to convert it to bare leads. Part numbers on the labels...

I also had issues with the WiFi adapter but didn't think to change the clock after I removed it. I'll try that, thanks for the tip!

Just out of curiosity, is it a split-phase inverter meant for the US? If it is, you'd be able to measure 120V across L1 and N, or L2 and N, but 240V between L1 and L2. Could just be a measurement mistake? Or really the wrong inverter for your market? Could you provide a make and model number for...

As @littleharbor2 mentioned, you have to take reviews with a grain of salt. I understood what I was buying going into it, and I've been very happy with the results of my little experiment over the past 8 months. It has given me enough confidence at a low enough price point to now consider...

I've got both a Tesla solar system on the roof of my house, and a DIY ground-mount system in my backyard, and between the two I cover my pool pump and EV charging during the day, with the excess being sold back to SCE for a few pennies. Outside of solar hours, my base load is about 0.4kWh...

Since you're doing this off-grid, you probably don't need to follow building codes to the letter, as long as you make it safe enough that you are comfortable with it. Not knowing your latitude, it's hard to recommend anything specific, as being more southerly will allow for smaller/fewer panels...

If the refrigerator you mention really only pulls 65w of power at 12V, that's about 5.5A. So if you have a 200AH LFP battery, you could run it for ~36 hours before the battery is completely drained. 200/5.5. If you have 400W of power going into the battery, and are only pulling 65W out, you...

Are you looking for used or new hardware for this project? 5'x12' is just not a lot of space. Doing some quick math based on some used 250W panels I bought recently, if you stretch your space slightly you could fit 4 of them in that space. They are 39.1"x65", so slightly longer than 5ft and 3'3"...

No battery, just the smallest system they sold at the time (4.08kW). I don't have any experience with AC coupling.

I don't have any close up pictures of the mounts. What I did was to make a drilling template that lined up two panels side by side to make sure the spacing was accurate and the existing mounting holes were aligned. Then I just duplicated it 11 times for the 10 panels. To mount the panels, I ran...

So far it has been working pretty well. I just passed 1MWh of power generated since installing it in mid-July, and it has definitely contributed pretty significantly to my daily power generation. I am unable to get the app to work with it, so I don't have any statistics logging or anything other...

I just started using my new Growatt MIC 3000TL-X grid-tie inverter that I bought from Signature Solar, and it's working well. I'm getting about 1.8kW out of my 2.5kW worth of used solar panels. The problem I am having is that every day I get home from work about 5:15pm and the inverter reports...

Cool. Thank you SparkyJJO. I am fully aware that there is no battery backup possibility. Our grid is stable enough that I'm not too worried about that. I have a small 12V system set up to run my home office off-grid, with the option to run an extension cord to the fridge in the case of the grid...

Can anyone explain the basics of micro-inverters to me? Here is a hypothetical situation where we live in a fantasy world with no connectivity rules but there is a well-functioning grid: If I have one 300W panel with one micro-inverter connected to it, and then connect the 3 output wires...

Hi everyone, I've been running my 1012LV for a few months now, and the WatchPower app is ok at giving me information, as long as my computer is on and I'm sitting at it. I'd like to instead plug the USB cable into one of my raspberry pi systems and aggregate the data from the inverter into a...