I recently added a Vitcron smart shunt in place or my other battery monitor in order to sync with solar assistant. I seem to be having some issues with what to put the settings at. I'm not sure what to put the charged voltage at as well as tail current and current threshold. The manual recommended 26.4v for a 24v system. That seems too low as it always shows the SOC at 100% anytime to voltage is above that but the battery is not at actually at 100%. Basically, what do you have for all your setting if you have a 24v LiFePO4 setup? (obviously Ah is relative, but everything else should be pretty standard)
If it matters, I currently have my charger/inverter settings with a battery absorption charge voltage of 28.5V, Battery float at 27.2, and Low voltage shutdown at 24V.
Thanks.
If it matters, I currently have my charger/inverter settings with a battery absorption charge voltage of 28.5V, Battery float at 27.2, and Low voltage shutdown at 24V.
Thanks.