42OhmsPA
What's in a title?
Thanks for following up. I wish I remembered to grab the FLIR before I left work so I could have compared with and without.I removed the flat washers they supplied, seemed like too may contact surfaces.
Thanks for following up. I wish I remembered to grab the FLIR before I left work so I could have compared with and without.I removed the flat washers they supplied, seemed like too may contact surfaces.
Thanks for following up. I wish I remembered to grab the FLIR before I left work so I could have compared with and without.
Thanks. Is the one linked the same you ordered?I have two of these. One I use for work in tight spaces and the other I keep in the house for my solar setup. Super handy for DIYers. The frame rate is low, but if you stabilize it on a target the interpolation is very close to my FLIR at less than 1/20th the cost.
$65
Thermal Imager Camera, Digital Thermal Imager 2.8in LCD Screen Display Temperature Multifunctional 320x240 Resolution with SPI Flash Chip for Industrial Use https://a.co/d/1Qxg4zU
Very nice setup and will be very handy when you need to work on a single battery bank.I never did update this with the final outcome, photos attached if someone else comes along, things have been running great.
Or add more ?Very nice setup and will be very handy when you need to work on a single battery bank.
I haven't seen any meaningful sunshine for a week now....beginning to think the same thing.Or add more ?
Thanks.I came across this BEP model in a different thread. I don’t know anything about it other than the advertised specs so not sure if it is good or not.
I like the breaker box you made. I had thought about something like that for a diy combiner box and using inline mc4 fuses for the fuse side of it. Hadn’t thought about it for the battery busbar setup.