Access sense terminals of Victron smart shunt?

[Maitake]

I will be using sunny island/ sunny boy with rec bms which requires a shunt.
I also want to keep the SI and SB off the internet for the most part. It looks like the victron smart shunt has a decent remote viewing page with the RPi and VenusOS.
My question is can the victron shunt sense terminals be accessed to supply the rec bms with battery current information?
Thanks

 

[Maitake]

Thinking I could void the warranty and drill/tap the brass end blocks to add some sense leads.

 

[Zil]

What is the wiring diagram of the meter you want to use with a Victron Shunt? With a simple monitoring meter, there are two wires that sense the voltage drop across a known resistance, the shunt. Those two wire connect one to the battery side and one to the load side of the shunt. A proper size ring terminal would work to connect to these battery studs on the shunt. No voided warranty, and the Victron should still work through the interface.