I'm installing 2 flexible panels on the roof of a teardrop trailer (surface is aluminum). I have 2 questions I need a little guidance.
1) Is it necessary to leave a small air gap under the panels?
2) I was going to use Sikaflex 252 to adhere the panels. But then started thinking about using VHB tape (which I suppose would leave a bit of an air gap). Any thoughts on all this?
Thank you for the help.
1) Is it necessary to leave a small air gap under the panels?
2) I was going to use Sikaflex 252 to adhere the panels. But then started thinking about using VHB tape (which I suppose would leave a bit of an air gap). Any thoughts on all this?
Thank you for the help.