Purchased a Renogy Inverter - Charger 2000 watt pure sine wave system to use solely as a UPS system, to keep computer , wifi router, and other small equipment while I power on a gas generator and flip on back feed breakers in my main AC panel.
Renogy unit :
Battery : https://www.vision-batt.com/site/product_files/6FM100D-X.pdf
I am programming the Renogy unit and I have to define the battery profile, the predefined profiles all seem to be for full charge / discharge cycles Not what I am looking for In the battery section I select other but I am confused as to what I should enter for the item 26 Bulk voltage , and 27 Floating voltage charging voltage.
The 100 AH 6fm100d-x has printed on battery Standby use : 13.2-13.8 V. so is it simple as setting the bulk charging to 13.8 and floating to 13.2 ?
thanks
Renogy unit :
Battery : https://www.vision-batt.com/site/product_files/6FM100D-X.pdf
I am programming the Renogy unit and I have to define the battery profile, the predefined profiles all seem to be for full charge / discharge cycles Not what I am looking for In the battery section I select other but I am confused as to what I should enter for the item 26 Bulk voltage , and 27 Floating voltage charging voltage.
The 100 AH 6fm100d-x has printed on battery Standby use : 13.2-13.8 V. so is it simple as setting the bulk charging to 13.8 and floating to 13.2 ?
thanks