Can anyone recognize the battery bank shown in the attached pictures?
Its a 24v system with 5 battery boxes and 1 controller box that i think is a DC-DC box to convert 24v to 12v, but I am not certain.
These were meant to go in a cabinet with a set of connector cables but I do not have those parts, and these batteries seem way to nice to just let them go to waste.
Any thoughts on how to wire them together? Does anyone recognize this system so I could potentially track down a schematic?
Can anyone ID if these are LiFePO4 or maybe a ton of the 18650's?
Any thoughts on what to do next would be extremely helpful. Thank you!
Its a 24v system with 5 battery boxes and 1 controller box that i think is a DC-DC box to convert 24v to 12v, but I am not certain.
These were meant to go in a cabinet with a set of connector cables but I do not have those parts, and these batteries seem way to nice to just let them go to waste.
Any thoughts on how to wire them together? Does anyone recognize this system so I could potentially track down a schematic?
Can anyone ID if these are LiFePO4 or maybe a ton of the 18650's?
Any thoughts on what to do next would be extremely helpful. Thank you!
Attachments
-
system_stacked-back_1833.jpg322.2 KB · Views: 6
-
system_stacked_1827.jpg306.4 KB · Views: 6
-
battery-open-box-BMU_removed_1790.jpg200 KB · Views: 6
-
controller-box-close_1780.jpg150.2 KB · Views: 6
-
controller-box-connector_1781.jpg141.7 KB · Views: 6
-
controller-box-close_1778.jpg338.2 KB · Views: 6
-
controller-box-open_1778.jpg206.9 KB · Views: 6
-
BMU-close_1770.jpg139.4 KB · Views: 6
-
battery-open-box_1775.jpg442.8 KB · Views: 6
-
connector-type_1768.jpg93 KB · Views: 6