PittsburghRed
New Member
- Joined
- Apr 13, 2022
- Messages
- 28
I finally have 90% of my system configured. Battery bank, 4 12v 100ah connected in 2s2p. Have battery monitor, lynx distributor, Victron mpg soalr controller. i have my Giandel 3000w inverter. Have it all connected, including filter guys precharger switch.
Here is my question I won’t be able to get panels connected for a few weeks but was hoping to get battery bank fully charged. I charged each battery indepedantly and then connected them all. Each battery is measuring 13.26v. The two banks are measuring 26.52, and the 4 connected are measuring 26.52 also.
So everything seems perfectly balanced so can i simply connect a 24v battery charger to the two output wires from the bank to fully charge them?
thanks in advance.
Here is my question I won’t be able to get panels connected for a few weeks but was hoping to get battery bank fully charged. I charged each battery indepedantly and then connected them all. Each battery is measuring 13.26v. The two banks are measuring 26.52, and the 4 connected are measuring 26.52 also.
So everything seems perfectly balanced so can i simply connect a 24v battery charger to the two output wires from the bank to fully charge them?
thanks in advance.