hbizzle27773
New Member
Hey there folks, i apologize if im being repetitive in that, full disclosure, i have tried to ask about this panel once before however i dont think i was asking the right questions and as a result i decided i would try again.
I was fortunate enough to be gifted four of these panels by a friend who didnt have use for them but knew i was trying to come up with a solar system for my fifth wheels rooftop. Now they all came with a microinverter each, but if theres one thing i was able to take away from my first post, was that, for my application, i would be much better off removing those and using the panels like, i guess any other panels minus the microinverter. i now also know that that is literally as simple as it sounds, but im wondering if it has something to do with where i then get confused.
So from what i understand, when looking to apply panels to any particular setup, some of the more important specs simply dont appear to be listed here and if they are then i am not reading it properly. but instead of fumble about trying to explain what i think i should be seeing so that i know how to proceed, i was hoping perhaps someone could help me understand where on the above label, if its there, i could find the information about the following:
1. I am working with a 12 volt system, does it look like i would be able to use these panels, i guess would that be nominal voltage?
2. the short circuit voltage
3. the open circuit voltage
So, then im hoping, with this information, i can figure out if perhaps i can use my current 12 volt charge controller on board with these panels, or if i need to find something else.
any information would be greatly appreciated