Hi, forgive me if I take this opportunity, I have a problem with the JK B2A8S20P-HC BMS. I made a mistake in setting the heating trigger temperature of the pads, the BMS turns on and I can read on the screen that it indicates "TEMP --200° celsius".. .. but after a few seconds it turns off, I disconnected the BMS from all the power cables and after 3 hours I reconnected the BMS but nothing changes, it shows for a few seconds that everything is ok, no errors but the temperature is --- 200° C, what can be done? I have written several emails to jkong but they don't reply.....thanks for your understanding. michele italia
attached imagep.s. as shown in the image (it lasts a moment then the BMS turns off and does not allow access to Bluetooth) it does not give any anomaly everything is ok, but it shows TEMP: - 200°C.
attached imagep.s. as shown in the image (it lasts a moment then the BMS turns off and does not allow access to Bluetooth) it does not give any anomaly everything is ok, but it shows TEMP: - 200°C.