Hello Again DIY Community,
If a BMS is reading a 48v 100a battery at 50a, will that prevent it from fully charging the battery?
I have a stack of 4x48v 100a lifepo4 batteries (19.2 kwh) and I can't get one of the ANT BMS to connect to it's app and it comes default set at 50a. My inverter says the stack only charges up to about 9.5kwh and I'm wondering if that BMS is the issue holding everything up.
Thanks in advance
If a BMS is reading a 48v 100a battery at 50a, will that prevent it from fully charging the battery?
I have a stack of 4x48v 100a lifepo4 batteries (19.2 kwh) and I can't get one of the ANT BMS to connect to it's app and it comes default set at 50a. My inverter says the stack only charges up to about 9.5kwh and I'm wondering if that BMS is the issue holding everything up.
Thanks in advance