Easyyokefilms
New Member
Hello guys. I was wondering, can I connect the following non identical panels in Series. I know there will be loss of effeciency but I just need to squize out all the power I can get pending the time I will get another charge controller and separate the panels.
Panel A - Vmp: 40.9v
Imp: 6A
Panel B - Vmp: 25v
Imp: 8A
I want to know if this is safe to connect together in series before I smoke any component. Like I said I know this wont be 100% efficient but can I safely connect them together in series to give me 65.9v, 6A(if my calculation is correct) Since voltage are added in series and the lowest Amp of the panels is used.
Panel A - Vmp: 40.9v
Imp: 6A
Panel B - Vmp: 25v
Imp: 8A
I want to know if this is safe to connect together in series before I smoke any component. Like I said I know this wont be 100% efficient but can I safely connect them together in series to give me 65.9v, 6A(if my calculation is correct) Since voltage are added in series and the lowest Amp of the panels is used.