Sportzfann
New Member
- Joined
- May 17, 2020
- Messages
- 93
I have 4 325 w jinco panels on my rv just installed and I’m getting ready to wire them.
the panel specs are 33.6 vmp and 9.6 Imp. I have a Victron 150/45 charge controller.
i wanted to run in parallel, but i will be real close to max amps of controller
If I run in series, I’m worried I will be to close to max volts.
would 2 pairs of panels in series i work if I parallel after ?
I was thinking this would work 67.2V and 19.36A to the controller?
Thanks,Sportz
the panel specs are 33.6 vmp and 9.6 Imp. I have a Victron 150/45 charge controller.
i wanted to run in parallel, but i will be real close to max amps of controller
If I run in series, I’m worried I will be to close to max volts.
would 2 pairs of panels in series i work if I parallel after ?
I was thinking this would work 67.2V and 19.36A to the controller?
Thanks,Sportz