Wacdam
New Member
- Joined
- Sep 8, 2022
- Messages
- 12
Hi
Quick question
I have a 40amp epaver tracer BN with a MT50 connected to two 250w solar panels and two 200ah lifepo4 batteries .
I have just purchased a second epaver 30amp AN as I want to also connect it to the existing battery bank ,so I can akso plug in a 200w solar blanket when I parked in the shade.
I did not buy a second MT50 as I assumed I could unplug the one from the 40BN to program up the 30AN and then plug it back into the BN afterwards I'm Just confirming this is OK to switch the MT50 between the two controllers as would rather not purchase a second one if I don't need to.
Thanks
Quick question
I have a 40amp epaver tracer BN with a MT50 connected to two 250w solar panels and two 200ah lifepo4 batteries .
I have just purchased a second epaver 30amp AN as I want to also connect it to the existing battery bank ,so I can akso plug in a 200w solar blanket when I parked in the shade.
I did not buy a second MT50 as I assumed I could unplug the one from the 40BN to program up the 30AN and then plug it back into the BN afterwards I'm Just confirming this is OK to switch the MT50 between the two controllers as would rather not purchase a second one if I don't need to.
Thanks