Can you plug the EG4 minisplit pv direct into 110 outlet?

[carpetdiemme]

I bought one of these heatpumps that are direct to pv. I dont have my panels setup yet and thought these were either pv direct or plug right into 110v for when you have no sun? I bought one ad it has no plus so I assumed I either read it wrong or need to get a cord. I know heatpumps are usually hardwired but, I thought I saw this was plug and play w/ 110v outlet and have a 20A dedicated outlet outside for it.

Is this true? Thanks. I dont get replies at all or for a while usually from sig solar so I didnt bother.

 

[timselectric]

It is designed for hard wiring. But you could put a cord on it.

 

[Plum Crazy Rob]

Yup did one for temporary power and idle load off (True Power = 8w, apparent power 32VA ) / power factor off (0.24) testing. BYOCord.

They were meaning plug and play for refrigerant lines

 

[740GLE]

That’s some quality power factor right there!!

Also decently low standby consumption. I can’t say that I’d open the breaker when not using the unit.