Alright so ive been tinkering a bit. ive made an schematic. so far so good. i was planning to use boost converters as the charge controllers.
and set them to the voltage to charge the 16cells to about 70% and when i flip a switch to 90% when i go for an long trip
However these would be constant power supply's then. so charging would be fine but can i leave them on? so that it will have that float voltage all the time with almost no current. or do i need to make an system to switch of the power supply when an full charge is reached/ almost no current is flowing
Ive been searching quite allot but i cant find it so fast. so maybe a link to a difrent thread or something. i would greatly appreciate that.
So core question. Can i leave a float voltage for 24/7?
If you see anything thats not connected right just let me know.
or any other suggestions.
And i am still in the design stage. i bought the cells so they should arrive in 30/45 days
and set them to the voltage to charge the 16cells to about 70% and when i flip a switch to 90% when i go for an long trip
However these would be constant power supply's then. so charging would be fine but can i leave them on? so that it will have that float voltage all the time with almost no current. or do i need to make an system to switch of the power supply when an full charge is reached/ almost no current is flowing
Ive been searching quite allot but i cant find it so fast. so maybe a link to a difrent thread or something. i would greatly appreciate that.
So core question. Can i leave a float voltage for 24/7?
If you see anything thats not connected right just let me know.
or any other suggestions.
And i am still in the design stage. i bought the cells so they should arrive in 30/45 days