Leo3
Solar and Wiring Newbie
- Joined
- Jun 13, 2020
- Messages
- 170
This SCC was stock in my travel trailer. It’s a 10amp and you can see in this pic it says 14amp. Trailer has one solar panel and I connected another in parallel. Hopefully the pic attached. I’m have bad service. It’s the readout in the SCC showing 14.6 amps input. It got up into the 15’s. So since 14/15 is a lot higher than 10, am I going to damage something or overheat a wire?
SCC specs:
-accepts up to 190 watts of solar at 12V. .
-LCD display shows Charging Current, Battery Voltage
-max solar panel input voltage 25V.
-max solar array current 10amps.
-battery voltage range 6-15.5volts
Here are the two panels:
Panel on trailer (maybe)
Voc 21 V
Vmp 17.5 V
Imp 5.68 A
SP120 Maxoak/Bluetti
SCC specs:
-accepts up to 190 watts of solar at 12V. .
-LCD display shows Charging Current, Battery Voltage
-max solar panel input voltage 25V.
-max solar array current 10amps.
-battery voltage range 6-15.5volts
Here are the two panels:
Panel on trailer (maybe)
Voc 21 V
Vmp 17.5 V
Imp 5.68 A
SP120 Maxoak/Bluetti
- Voc 23.7 V (so 2 would be 47.4V)
- Vmp 19.8 V (so 2 would be 39.6V)
- Imp 6.06 A (so 2 would be 12.12A)