scott harris
New Member
- Joined
- Jan 1, 2020
- Messages
- 92
I have a victron 15/75 scc connected to my 24v battery and two renogy 175 flexible panels connected in series. The victron powers up due to the battery power but does not charge the battery even though the panels are unobstructed and it is a nice sunny day.
I'm not sure if the problem is with the panels or the victron. My question is: can I replace the panels with a dc power supply to test whether the victron will turn on at 29 volts ?
Panel specs
Vmp 19.5 volts
Voc 23.9 volts
Imp 8.98 amps
Isc 9.5 amps
I'm not sure if the problem is with the panels or the victron. My question is: can I replace the panels with a dc power supply to test whether the victron will turn on at 29 volts ?
Panel specs
Vmp 19.5 volts
Voc 23.9 volts
Imp 8.98 amps
Isc 9.5 amps