waygonewilco
New Member
Hi all, thanks for this forum and all of your knowledge.
I just upgraded my deep cycle batteries to a Chins 200 amp hour LiFePo4 battery with bms and low temp shutoff. My question is that using the EE-BMS app, I see that the battery is at 99% SOC at 13.4 volts, but Chins advises setting charge limit to 14.6 volts. Do I have a bad battery or am I missing something?
I have about ~350 watts coming into a Renogy Rover 40 amp controller. Have had serious issues with the controller and will be replacing with an Epever in the next few days
I just upgraded my deep cycle batteries to a Chins 200 amp hour LiFePo4 battery with bms and low temp shutoff. My question is that using the EE-BMS app, I see that the battery is at 99% SOC at 13.4 volts, but Chins advises setting charge limit to 14.6 volts. Do I have a bad battery or am I missing something?
I have about ~350 watts coming into a Renogy Rover 40 amp controller. Have had serious issues with the controller and will be replacing with an Epever in the next few days