ChrisCarr
New Member
- Joined
- Dec 24, 2021
- Messages
- 21
Hey Guys,
So currently setting up a "new to us" motor home for some adventuring this summer.
Current setup..
2X200 watt panels, Midnite Kid with whizbang jr, KISAE 2000 watt pure sine inverter & 280 AH DIY LifePO4 with JBD BMS
Battery is pretty much brand new and other then some light testing has not really been cycled.
Now my question
My charge controller absorb settings.....I have it at 14.2 volts for 15 min. Pretty much everyday it goes to float and says the battery is at 100%, the BMS how ever says about 40%.
So, wondering if I should increase absorb time?
Is posible they will ballance out after getting some "real" use?
So currently setting up a "new to us" motor home for some adventuring this summer.
Current setup..
2X200 watt panels, Midnite Kid with whizbang jr, KISAE 2000 watt pure sine inverter & 280 AH DIY LifePO4 with JBD BMS
Battery is pretty much brand new and other then some light testing has not really been cycled.
Now my question
My charge controller absorb settings.....I have it at 14.2 volts for 15 min. Pretty much everyday it goes to float and says the battery is at 100%, the BMS how ever says about 40%.
So, wondering if I should increase absorb time?
Is posible they will ballance out after getting some "real" use?