The EG4 6500EX and 6000EX are set up to wire into your main panel. But I want to connect my unit to a Transfer Switch that has the Nema L14 / 30 amp connector.
How do you wire an EG4 6500 to that switch? I would need to have a female Nema L14 connector on the other end of the wire in order to plug into the transfer switch.
For the Nema L14 connection, you need 3 wires plus a ground which the EG4 units do not have. I only see the black, ground & neutral. I seen in one of the Prowse videos he mentions they can be hooked up to an external transfer switch and in the video shows a box that is the same as what I have.
Does anyone know how to do this? I am also looking at the EG4 6000EX and need to connect a switch to this unit also. The AC input / output look the same as the 6500, with only 3 wire connectors, hot, neutral & ground.
How do you wire an EG4 6500 to that switch? I would need to have a female Nema L14 connector on the other end of the wire in order to plug into the transfer switch.
For the Nema L14 connection, you need 3 wires plus a ground which the EG4 units do not have. I only see the black, ground & neutral. I seen in one of the Prowse videos he mentions they can be hooked up to an external transfer switch and in the video shows a box that is the same as what I have.
Does anyone know how to do this? I am also looking at the EG4 6000EX and need to connect a switch to this unit also. The AC input / output look the same as the 6500, with only 3 wire connectors, hot, neutral & ground.