I have 6 Life power 4 batteries and the 6000ex split phase inverter. Suddenly the inverter showed fault code 07 (overload) even though no new loads were put on it. I shut off the breaker from the batteries to the inverter and turned the inverter off, but it took about 15 minutes for the alarm tone to stop and the inverter to actually shut down. I also turned off all the batteries.
After the inverter finally shut off I turned the batteries all back on, turned on the breaker, and pushed the inverter On button. The inverter did not turn on and the red ALARM light on all the batteries turned on immediately.
The only loads on the system were our Starlink, a fridge, and an RV ac unit. But they were on it for hours before faulting and the batteries still showed high SOC.
After the inverter finally shut off I turned the batteries all back on, turned on the breaker, and pushed the inverter On button. The inverter did not turn on and the red ALARM light on all the batteries turned on immediately.
The only loads on the system were our Starlink, a fridge, and an RV ac unit. But they were on it for hours before faulting and the batteries still showed high SOC.