MrNatural22
?SW sunshine =⚡️⚡️lit up thru the darkness✌️
Humm when using a battery guard to disconnect the battery at a set voltage it seems this would present an issue of having to recharge the inverters caps again on reconnect which as previously discussed can be hard on switches and the BMS?
On dc loads from the battery the inverter wouldn’t disconnect only the dc load. ?
I’m not very happy with my Samlex pat 2000 24v LVD @20v I would prefer above 21v.
The settings are not programmable on the pst series.
On dc loads from the battery the inverter wouldn’t disconnect only the dc load. ?
I’m not very happy with my Samlex pat 2000 24v LVD @20v I would prefer above 21v.
The settings are not programmable on the pst series.
Last edited: