Growatt 5000es 5001 error overcharge warning

[Mohdsaadi]

Hi
I have growatt 5000es + 15 kw felicity lithium battery
I was checking the shinephone app and i noticed there's a message an error 5001 overcharge battery warning
Although the bms is workings
I've noticed that when the battery reaches %100 the electricity will shut off for 1 sec
Any suggestions?

 

[Mohdsaadi]

Hi
I have growatt 5000es + 15 kw felicity lithium battery
I was checking the shinephone app and i noticed there's a message an error 5001 overcharge battery warning
Although the bms is workings
I've noticed that when the battery reaches %100 the electricity will shut off for 1 sec
Any suggestions?

I was checking the settings number 13 was on 95% so i put it on %90 to see...

 

[Parys]

... DELETED... See below

 

[Parys]

Hi
I have growatt 5000es + 15 kw felicity lithium battery
I was checking the shinephone app and i noticed there's a message an error 5001 overcharge battery warning
Although the bms is workings
I've noticed that when the battery reaches %100 the electricity will shut off for 1 sec
Any suggestions?

Hi, I also have a felicity LifePO4 48V LPBF48300 15kwh battery and Growatt SPF Es5000 inverter but I've been struggling to get the Bms to work between the two of them. I keep getting the error 04 & 20 faults.
I need the bms to work cos my battery shows all 4 lights (100%) but the inverter reads battery is 75%.
Same thing with a friend who uses SRNE inverter with the Felicity Battery; inverter 75%, battery 100%.

Pls what protocol settings did you use for your growatt and felicity battery?
05 - Li
036 what protocol?
How is the dip on the battery set?
Can you share a picture of your Rj45 pin heads?

I will really appreciate.

Thank you.

 

[Mohdsaadi]

Hi, I also have a felicity LifePO4 48V LPBF48300 15kwh battery and Growatt SPF Es5000 inverter but I've been struggling to get the Bms to work between the two of them. I keep getting the error 04 & 20 faults.
I need the bms to work cos my battery shows all 4 lights (100%) but the inverter reads battery is 75%.
Same thing with a friend who uses SRNE inverter with the Felicity Battery; inverter 75%, battery 100%.

Pls what protocol settings did you use for your growatt and felicity battery?
05 - Li
036 what protocol?
How is the dip on the battery set?
Can you share a picture of your Rj45 pin heads?

I will really appreciate.

Thank you.

Hi ,
first you need to made a custom communication cable
on the inverter side you need to connect pin 1 and pin 2
on the battery side you need to connect pin 5 and pin 6
so pin1 on the inverter will connect to pin 5 on the battery
and pin 2 on the inverter will connect to pin 6 on the battery
option :
036 - L04
if you want you can text me on wp to send you some pictures

 

[Parys]

Hi ,
first you need to made a custom communication cable
on the inverter side you need to connect pin 1 and pin 2
on the battery side you need to connect pin 5 and pin 6
so pin1 on the inverter will connect to pin 5 on the battery
and pin 2 on the inverter will connect to pin 6 on the battery
option :
036 - L04
if you want you can text me on wp to send you some pictures +96170514782

I can't help but appreciate you once again... After much back and forth, it worked. Thanks for your support. ? ? ? ? ?

 

[fadiabiaad]

Hi All, i am new here and i need your Help.
I have a felicity LPBF48300 15kwh battery and a Must PV1800 VHM 5.5 and i need the correct settings on the inverter for the proper charging.
Is there a tool to read the battery BMS or to communicate the BMS with the Inverter?

 

[jamalsaf]

Hi mohamed, can send in detail and picture what have done to fix the over charging probkem

 

[wissoz]

Hi
I have growatt 5000es + 15 kw felicity lithium battery
I was checking the shinephone app and i noticed there's a message an error 5001 overcharge battery warning
Although the bms is workings
I've noticed that when the battery reaches %100 the electricity will shut off for 1 sec
Any suggestions?

Hello, it happened to me today but i have lead acid batteries. Everything is normal and working fine. Did it happen again for you?