shizenyasuya
New Member
- Joined
- Oct 15, 2019
- Messages
- 10
Sorry if somebody has posted this already. I contacted harbor freight because I bought the same pump and I was looking for amperage or wattage information. They sent me the following in response.
Below are the specs you requested.
Current Draw (Amps):
Start Up: 28 A (3360 watts)
Max Flow: 8.6 A (1032 watts)
Max Pressure: 9.9 A (1188 watts) I think I will respond and ask them if they can recommend a soft start for the product. Alternatively, I do believe I found one on Amazon it's meant to work with planers and other induction motor loads. I don't really want to spend $160 on it, but here is the link for anybody who does.
Innoraymond GS10 Universal Soft Starter for Miter Saw Table Saw Grinder Router Planer etc. (120V, 15A max.) https://a.co/d/0YiLWmt
Below are the specs you requested.
Current Draw (Amps):
Start Up: 28 A (3360 watts)
Max Flow: 8.6 A (1032 watts)
Max Pressure: 9.9 A (1188 watts) I think I will respond and ask them if they can recommend a soft start for the product. Alternatively, I do believe I found one on Amazon it's meant to work with planers and other induction motor loads. I don't really want to spend $160 on it, but here is the link for anybody who does.
Innoraymond GS10 Universal Soft Starter for Miter Saw Table Saw Grinder Router Planer etc. (120V, 15A max.) https://a.co/d/0YiLWmt