I'm having the hardest time understanding how to properly ground my system. I have a school bus conversion with a full off-grid system.
Below is my system:
Renogy 550w Panels (4)
Eg4 48v 100ah batteries (2)
Victron Charge Controller
Victron Lynx Shunt
Victron Lynx Distributor
Victron Multiplus II
All tied into a Cerbo GX
All of my components seem to have a ground screw, but from what I understand it's more for interference than safety, maybe I'm wrong? If that's not the case, how do I properly ground my system?
A - Do I even need to?
B - Do I ground only AC side (ground wire to chassis)?
C - Do I ground everything to a bus bar and then to the chassis?
Below is my system:
Renogy 550w Panels (4)
Eg4 48v 100ah batteries (2)
Victron Charge Controller
Victron Lynx Shunt
Victron Lynx Distributor
Victron Multiplus II
All tied into a Cerbo GX
All of my components seem to have a ground screw, but from what I understand it's more for interference than safety, maybe I'm wrong? If that's not the case, how do I properly ground my system?
A - Do I even need to?
B - Do I ground only AC side (ground wire to chassis)?
C - Do I ground everything to a bus bar and then to the chassis?