Zwy

I am referring to the SRNE inverters being discussed...... No firm price on the 10K parallel versions of the SRNE ASP but price should...

I found it easier to use the 36 inch post hole auger bit with an extension. Makes em stand up for eternity.

You call 811 on other properties? So they get upset at the flag markers and spray paint? You troublemaker :)

Will work fine, I run 420 feet, about 320V and 13A on 10AWG.

I was gonna do it until I knicked a bit of my underground UF-B with a shovel and that's how I learned to just use conduit in the future.

48V battery bank so I guess it is your choice. Buy spares if the price is right.......

Not hard to find...

None at all imo. There’s the eg4 6kxp, a host of Chinese 10kw inverters all with differing levels of grid connectivity, or this. Just...

I have Solar Assistant on my phone too, this helps me determine: The loads on the inverters and what SOC currently is and if we will...

If you don't have a Victron Smart Shunt already, you will want to purchase and install one and plug it into Solar Assistant. The...

Believe it or not, I know the installer. I control the network for that home in the video. I wired his RV probably 5 years ago, he was...

HB600 would be slight overkill for this application. MT Solar mounts are designed for rated wind for the area, here it is 105 mph.

The beams on my current MT Solar mount with 16 530W panels is 4x6 with 3/16" flange and beam and is referred to as SD, Standard Duty...

Or you could simply cut out the problem during the design phase and use 48V batteries of course 😎. As everyone has suggested. Before...

Not quite. It's actually 4 12v BMS controlled batteries in series. The issues are with multiple BMS's in series, causing imbalance...

Will never happen. There will be an epic eventual failure followed by an epic lawsuit.

For how to connect independent bms's to SolarAssistant, visit their website linked earlier. Then it looks I am a fool since I have...

Yeah, I believe this is just a purely marketing video. I cannot see how anyone would ever choose this configuration for a large scale...

Exactly. I don't have to do that with my system. I must be doing it wrong?

That is a parallel flow condenser. It is used in automotive applications because it is cheap to manufacture and can have a higher heat...