HELP With Configuration

[BCBjorklund]

Hi All,

I need some help with configuration of Install/Modifcation To RV Fifthwheel upgrade to electrical system

I currently have:
2-200W Future Solutions Solar panels on one Solar port on roof
1-Spare 30A Solar Port
1-Xantrex Inverter (Freedom X/2000)
1-30A Vectron Smart Solar MPPT controller
1-Vectron Smart Shunt
2-100ah Lead acid batteries

1-3200W Generator


I purchased :
6-Chins 1001/h Lithium batteries
1-Victron Energy Multiplus-II 12/3000/120/50 2x120v Inverter
1-Victron VE.Bus Smart Dongle
1-Victron Energy GX Touch 50 Monitoring System
1-Victron Interface MK3-USB
1-Victron SmartSolar MPPT 100V 50 amp 12-24V Solar Charger
1-Victron SmartShunt 500 amp Battery Monitor

Future additional two Solar panels(200-300W) 400-600 W total
How do I make this all connect?

 

[MisterSandals]

Have you done the math with your solar panel/array voltage (temp compensated) and how that relates to SCC max input volts?

To figure wire and fuse sizes, you need to break it worn into wire runs with : amps, volts and distance.

Start with array to SCC and you will see the pattern and tools used.

 

[BCBjorklund]

Wire size I have

Have you done the math with your solar panel/array voltage (temp compensated) and how that relates to SCC max input volts?

To figure wire and fuse sizes, you need to break it worn into wire runs with : amps, volts and distance.

Start with array to SCC and you will see the pattern and tools used.

I am okay on Wire size as I always up the size above max amp use and yes I know loading for each circuit and device I am using