bikerider4818
New Member
I do not have a battery rack, so how do I configure the wires from the 6000xp's to the batteries? Especially with the small terminal area for the cable lugs on the EG4 Lifepower batteries. Is the only way to do it is to have a bus bar? While we're at it, what awg cable should I use from the inverters to the batteries or, if needed, from the inverts to the bus bar and then to the batteries? I currently have one 6000xp connected to two Lifepower batteries which was easy, but I'm adding a second inverter (and eventually another battery) so I'm trying to figure out the proper way to connect the two inverters to the batteries without having to fork out hundreds of $ for a rack with bus bars. Thanks