just noticed when checking the batt pack i was getting a reading of .5v differance from the lcd readout .
lcd 24v meter 24.5 i have 2 meters so as to keep a check on them , any way i had the inverter set to max 28,8v meter reading was 29.6 (battery) . i have since turned the max down to 28v , anyway twice now the inverter has shut down saying code 8 bus short circuit fault (unrecoverable ) lucky if you shut it all down it resets , looking online there is not much on code 8 but one video was showing a battery adjustable voltage input controler once they turn the power upto 29.6 the inverter shut down code (8)
so again telly on sunny outside only about 200w being used so solar running that and recharging the batt pack then it powers down code 8 again now i am guessing battery got too high a voltage and shutdown the inverter , so can it be an easy fix or send it back from where it came from
lcd 24v meter 24.5 i have 2 meters so as to keep a check on them , any way i had the inverter set to max 28,8v meter reading was 29.6 (battery) . i have since turned the max down to 28v , anyway twice now the inverter has shut down saying code 8 bus short circuit fault (unrecoverable ) lucky if you shut it all down it resets , looking online there is not much on code 8 but one video was showing a battery adjustable voltage input controler once they turn the power upto 29.6 the inverter shut down code (8)
so again telly on sunny outside only about 200w being used so solar running that and recharging the batt pack then it powers down code 8 again now i am guessing battery got too high a voltage and shutdown the inverter , so can it be an easy fix or send it back from where it came from